Unleash the Power of Industrial Coating: Enhance Durability and Performance!

Extremely durable, single-component, multi-substrate waterborne acrylic urethane ideal for facility maintenance and property management applications where minimal maintenance disruptions and quick returns to service are required. This interior/exterior, UV-resistant acrylic urethane enamel provides superior adhesion and abrasion resistance on a variety of substrates.

• Quick dry. Dries to touch in 15 minutes

• Return to service: vertical surfaces in just 1 hour; foot and forklift traffic-ready in 24 hours

• Flexible—resists cracking and peeling

• Block Resistant—fast, tack-free formula

• Interior/exterior

• Low-temperature application (35°F)

• Tenacious adhesion

• Engineered with Gennex ® Color Technology

• Available Colors: White

Clear Acrylic Sealer is a waterborne, fast drying, clear acrylic coating formulated as an easy-to-apply seal coat on bare concrete floors and other masonry surfaces. This product is designed to allow for easy sweep up of dust and to reduce water penetration or erosion, efflorescence, spalling, and chalking without changing the natural appearance of the substrate. Areas exposed to heavy-duty industrial traffic or severe exterior conditions may require multiple coats.

• Rapid dry

• Soap and water clean-up

• Can be used over a variety of substrates

• Blister and alkali fume resistant

• For helpful information, check out our tools and resources page

• Available Colors: Clear

Concrete Etch is used for removing laitance and for etching bare concrete. This pretreatment includes surfactants that provide better penetration for removing foreign materials and contaminents. It also contains extenders which give a more even etch over larger areas.

• Concentrated for maximum strength

• Inhibitors protect metal surfaces from corrosion

• May be used to remove rust and scale from steel

• Visit our Epoxy Floor Guide page for Application Information

Prep All Universal Metal Primer is an economical, single-component primer engineered to provide corrosion protection on all ferrous metals. This quick-drying formula provides fast production times, and its alkyd resin formulation allows for application of a wide variety of intermediate and finish coat products. Formulated for air spraying, it can also be applied by airless and HVLP sprayers, brushes, or rollers.

• Fast 30 minute dry – recoat in 4 hours

• Tie coat over many existing coatings

• Corrosion protection on all ferrous metals

• Available in White, Red or Gray

• For helpful information, check out our tools and resources page

• Available Colors: White, Red, and Gray

V200 product is a heavy-duty alkyd enamel intended for use on a wide variety of surfaces, both interior and exterior. The surface-tolerant formula sticks to surfaces that may be marginally prepared, and the exceptional flow and leveling provides a smooth, uniform finish. Made with our toughest alkyd resin, this paint stands up to mechanical and human abuse, while the urethane fortification adds gloss and color retention in exterior spaces exposed to sunlight and rain.

• Urethane modification for maximum durability

• Easy application

• For use on all surfaces

• Hard, scratch- and impact-resistant coating

• High-solids formula

• For helpful information, check out our tools and resources page

• See how Corotech impacts commercial and industrial jobs in our video series

Colorant Used: Universal

Polyamide Epoxy Coating is a multi-use epoxy designed for tanks, machinery, floors, structural members, walls, boats, and other industrial and commercial substrates requiring a durable coating in severe environments. Floors: moderate- to heavy-duty performance in commercial/industrial environments exposed to heavy foot traffic and occasional traffic of lightweight rubber-tired vehicles, intermittent spillage of mild to heavier chemicals, occasional steam and chemical cleaning. Metal: excellent for use on ferrous metals, non-ferrous metals and galvanized metal.

• Highly cross-linked film for toughness and durability

• Resists many chemicals and solvents

• Medium build epoxy

• Suitable for immersion

• Suitable for use in USDA inspected facilities

• For helpful information, check out our tools and resources page

Colorant Used: Industrial

Fire Retardant Paint expands and forms a thick cellular char blanket, called intumescence, when attacked by flame. This latex paint retards flame spread, minimizes smoke development, and applies like a conventional latex flat paint.

• Slows the spread of fire and smoke

• Chemical reaction forms intumescence

• For commercial and residential use

• Low-VOC

• Dries to a decorative flat finish

• Available Colors: White

Ultra Spec® HP D.T.M. Acrylic Enamels provide excellent rust inhibition for superior corrosion control and protection for metal substrates.

• Direct to metal application

• Improved gloss and color retention

• Easy application

• Provides superior rust inhibition and control

• Primer and finish coat

• Fast dry

• Excellent adhesion

• Engineered with Gennex® Color Technology

• Available Colors: 08 Safety White, 15 Safety Yellow, 21 Safety Red, 60 Bronzetone and 82 Safety Black

• Available in Gloss, Semi-Gloss, and Low-Lustre

Latex, acrylic fast set and alkyd traffic and marking paints, in a variety of colors, constitute the INSL-X® portfolio of traffic paints.

Latex Traffic Paint is a fast-drying, exterior/interior acrylic latex line marking paint. It can be applied with a brush, roller, or hand or automatic line markers.

• Acrylic latex traffic paint

• Fast dry

• Exterior/interior use

Acrylic Metal Primer is a water-reducible, rust-inhibitive primer for steel, iron, and non-ferrous metal. It provides excellent adhesion to a range of hard-to-coat surfaces and can even be applied over tightly adhering rust. Designed for light-to-moderate industrial exposures, this product can be top coated with a wide variety of coatings.

• High solids content

• Suitable for occupied areas

• Can be recoated in just 4 hours

• Suitable for use in USDA-inspected facilities

• Qualifies for LEED certification

• For helpful information, check out our tools and resources page

Waterborne Amine Epoxy is formulated to provide good chemical, abrasion and impact resistance on a variety of commercial and industrial surfaces, including steel, iron, concrete, non-ferrous metals, wood and drywall. Particularly suited for use on concrete floors. This product can be applied to many existing generic coating types with less risk of lifting or wrinkling.

When used on floors, this product provides moderate- to heavy-duty protection in commercial environments exposed to frequent foot traffic and occasional traffic of lightweight rubber-tired vehicles, intermittent spillage of mild chemicals, occasional steam cleaning, and powerwashing.

• Water cleanup, fast dry

• Easy application with excellent adhesion

• Very good resistance to water and chemicals

• Excellent for use on basement floors

• Meets qualifications for LEED when used over metal substrates

• Suitable for use in USDA inspected facilities

• For helpful information, check out our tools and resources page

Aliphatic Acrylic Urethane – Gloss is a multi-use, two-component urethane appropriate for use on both metal and masonry. This product provides excellent gloss and color retention when used on exterior surfaces exposed to sunlight and rain, and the highly cross-linked formula provides superior abrasion, chemical, and solvent resistance. Due to these outstanding features, urethanes are often used as the final layer in a multi-layer system on steel or masonry.

• Resistant to hydraulic fluid

• Outstanding UV protection

• High chemical and abrasion resistance

• Suitable for use in USDA inspected facilities

• Meets performance specs of MIL-C-85285

• Excellent anti-graffiti coating

• For helpful information, check out our tools and resources page

• Available Colors: Clear, White, and Black; Tintable White, Deep Base, and Clear Base

100% Solids Epoxy Pre-Primer is formulated for use on both steel and masonry. For rusted steel where extensive surface preparation is needed, but not logistically possible, the penetrating properties and extended dry time — 16 hours at 77 °F — of this two-component epoxy seal crevices and other imperfections, promoting better adhesion for subsequent coats. For prepared masonry surfaces, V155 penetrates and seals, providing an excellent foundation for subsequent coats of Corotech epoxy floor coatings. The unique, 100% solids formula of V155 forms a sealed epoxy barrier that inhibits future corrosion.

• Low viscosity easily fills voids and crevices

• Does not shrink - eliminates craters

• Chemical and fume resistant

• Extended cure time allows maximum penetration

• Seals previously coated concrete, masonry, and galvanized metal

• Qualifies for LEED certification

• For helpful information, check out our tools and resources page

• Available Colors: Clear

Oil & Grease Emulsifier is designed for cleaning walls, floors and equipment. This cleaner is extremely effective in removing oil, grease, fats, blood and animal by-products. It may also be used for cleaning concrete, asphalt, vinyl, metal, plastic, fiberglass, etc.; it is also very effective for cleaning equipment, tools, brushes, rollers and spray equipment.

• Concentrated and must be mixed with water

• Biodegradable and phosphate-free

• Use on metal, fiberglass, vinyl, and masonry surfaces

• Rinses clean with no residue

• For helpful information, check out our tools and resources page

Rust Arrestor is a water-based, film-forming primer that chemically transforms rust, halting the corrosion process and enabling the surface to accept a topcoat. When applied over tightly adhering rust, it forms a black, protective film.

• Chemically converts rust to inhibit corrosion

• Forms a tight chemical bond to rusted surfaces

• Penetrates into tight areas

• Suitable for use in USDA inspected facilities

• Can be top coated with latex, alkyd, urethane, or epoxy finishes

• For helpful information, check out our tools and resources page

Shop Primer is an economical steel primer for commercial use in mild to moderate exposures. This product is ideal as a temporary transport coat on fabricated pieces or as an economical barrier primer. It is a temporary coating. This primer may be top-coated with a wide variety of finishes. However, finishes containing strong solvents (Ketones, Xylene, Toluene) may cause wrinkling or lifting of Shop Primer.

• Economical protective coat

• Accepts a wide variety of topcoats

• Dry to the touch in 30 minutes

• For helpful information, check out our tools and resources page

• Available Colors: White, Red or Gray